Samsung Galaxy S6 Reassembly

Everyone can use this coupon code: ETSKFIUZI for extra discounts on www.etradesupply.com for order over $50, and it won’t be expire until April. 30th, 2015.  

http://www.etradesupply.com/blog/samsung-galaxy-s6-reassembly/

As we have torn down Samsung Galaxy S6, now we show you how to reassemble the gadget back step by step.

Tools Needed:

A Pair of Tweezers

PH00 Philips Screwdriver

  

1.         Insert The Home button with flex cable.

a)         Slide the flex cable through the slot to the back

b)         Press down the home button and make sure it is secure.

2.         Get the USB port back in.

a)         Attach the soft key LEDs to place.

b)         Make sure all the parts are aligned.

3.         Stick the LCM back into place.

a)         Make sure the connector goes back through its slot

b)         Squeeze the parts and Make sure they are aligned correctly.

4.         Fasten 1 Screw to secure the earphone jack. (You can find out the screw easily because it's different from other screws)

     

5.         Place the vibrate motor, ear speaker and proximate sensor into the slot respectively.

a)         Make sure the proximate sensor is facing the right way.

6.         Get the rear facing camera into the mainboard.

     

7.         Connect the charging port assembly to the mainboard.

     

8.         Put the mainboard back into the place.

a)         Make sure not to get any flex cable connectors caught behind it.

9.         Set the front facing camera back into place.

a)         Connect flex cables to the mainboard.

10.     Connect the WiFi and Bluetooth antennas to the mainboard.

a)         Make sure you set them back into the slot so that they fit better

11.     Put the battery in and connect its flex cable to the mainboard.

      

12.     Put the side keys to the slot. (They are the same side keys)

a)         Put the flex ribbon over top of them and press them all into place.

13.   Put the wireless coil in place properly. (Handle carefully for the fragile coil.

14.     Put the middle plate and front assembly back together.

            

15.     Fasten 13 screws in the rear housing.

            

16.     Put the battery door back.

            

17.     Insert the SIM card tray.

           

The Samsung Galaxy S6 reassembly is completed. Anyways, if you still have questions, you can watch our Galaxy S6 reassembly video , or just comment below to let us know. We will reply to you as soon as possible.

How To Tear Down The Samsung Galaxy S6 In 10 Steps

We just got our hands on the brand new Samsung Galaxy S6. We are all curious to see the insides of this new phone. So is it hard to repair? Anything to watch out for? Here we've taken it apart for you.

Tools Needed:

▪ Repair Tools BST-8921 (38 pcs/set)

▪ Heat Gun/Hair Dryer

▪ Spudger Tool

Step 1: Take Out The SIM Card Tray.

▪ Power off the Samsung Galaxy S6.

▪ Use an ejector pin or tweezers to take out the SIM Card Tray.

Step 2: Take Apart The Battery Door.

▪ Heat up the Samsung Galaxy S6's Battery Door.

▪ Pull the battery cover up with a screen suction cup tool. (The battery door is stuck to the middle plate with some really strong adhesive, take your time to remove it)

▪ Separate the battery door with a case opening tool.

Step 3: Release The Rear Housing.

▪ Undo the 13 screws in the rear housing.

▪ Heat up the LCD Assembly.

▪ Separate the rear housing from the LCD Assembly with the help of a suction cup tool and case opening tool.

(Notice: be careful not to damage the wireless charging chip attached to the battery.)

Step 4: Remove The Case Buttons.

▪ Remove the power button flex.

▪ Remove the volume button flex.

▪ Remove the Case Buttons. (Notice: the Galaxy S6 power button and volume buttons are compatible with each other.)

Step 5: Release The Wireless Charging Chip

▪ Pry up the wireless charging coil's flex ribbons on both sides of rear housing. (Notice: be careful not to damage the flex ribbons.)

Step 6: Remove The Motherboard.

▪ Pry up the LCD assembly connector, front facing camera connector, battery connector, ear speaker connector and home button flex ribbon connector.

▪ Turn over the motherboard and pry up the connector.

Step 7: Remove The Battery.

▪ Gently pry up the battery with a spudger tool.

Step 8: Remove Small Components.

▪ Remove the front facing camera.

▪ Remove the ear speaker. (Notice: be careful not to break the flex ribbon.)

▪ Remove the vibrating motor.

▪ Remove the rear facing camera.

Step 9: Release The Charging Port Assembly.

▪ Remove the Bluetooth and Wi-Fi cables.

▪ Undo the earphone jack screw. (Notice: the screw is different than the rear housing screws.)

▪ Heat up the LCD Assembly to release the front housing.

▪ Pry up the navigation light stickers.

Step 10: Release The Home Button With Flex.

▪ Pry up the connector on the back side of home button.

▪ Pry up the home button.

The Samsung Galaxy S6 disassembly is now complete.

We will do several different Samsung Galaxy S6 test and review videos in the coming days, so stay tuned!