Use this coupon code: ETSO4BG0 for extra discounts on for order over $50, and it won’t be expire until Dec 31, 2014.
You can get the repair parts for your iphone 6 from here:
http://www.etradesupply.com/apple/iphone/apple-iphone-6-plus.html
Since the screen of iPhone 6 plus has been enlarged to 5.5 inches, the possibility of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus screen, official repair will cost you up to a week exclude the time you make the appointment. So if you are skilled enough, replacing the iPhone 6 plus broken screen yourself is a better choice. Here we will walk you through a simple 5 minutes DIY repair guide for replacing the broken iPhone 6 plus broken screen.
Tools Needed:
Pentalobe Screwdriver
Philip Screwdriver
Tweezers
Suction Cup Tool
Case Opening Tool
Step 1. Shut down your iPhone 6 plus before you do anything else. (Make sure you’ve done this before the disassembly begins, or you may cause short circuit of the inner parts of the phone which may harm the motherboard)
Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We recommend you to use a magnetic pad for putting those screws in case losing them)
Step 3. Stick the suction cup on the bottom of the phone and then pull out the broken screen. (If your screen has already shattered badly, use transparent adhesive tape to cover the surface of the screen to avoid any further damage)
Step 4. Undo 5 screws holding the metal cover, then take the metal cover out.
Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front facing camera connector and home button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen assembly with home button, fame and front facing camera, then you just need to put the new one on)
Step 6. Undo the 3 screws holding the home button retaining bracket then pick it up.
Step 7. Pry up the home button flex cable connector then remove the home button.
Step 8. Undo the 3 screws that holding the metal cover on the ear speaker.
Step 9. Take out the retaining bracket, ear speaker and front facing camera.
Step 10. Undo the 7 screws that locking the LCD metal plate.
Step 11. Pry up the LCD back plate connector.
Step 12. Replace your broken screen with the new one.
Note: We strongly recommend you to test the function of the new iPhone 6 plus digitizer and LCD screen assembly before you install it on. If you unfortunately get the defective part, you could ask your supplier to exchange for a new one.
Pentalobe Screwdriver
Philip Screwdriver
Tweezers
Suction Cup Tool
Case Opening Tool
Step 1. Shut down your iPhone 6 plus before you do anything else. (Make sure you’ve done this before the disassembly begins, or you may cause short circuit of the inner parts of the phone which may harm the motherboard)
Step 2. Undo 2 screws on the bottom with the help of the Pentalobe Screwdriver. (We recommend you to use a magnetic pad for putting those screws in case losing them)
Step 3. Stick the suction cup on the bottom of the phone and then pull out the broken screen. (If your screen has already shattered badly, use transparent adhesive tape to cover the surface of the screen to avoid any further damage)
Step 4. Undo 5 screws holding the metal cover, then take the metal cover out.
Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front facing camera connector and home button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen assembly with home button, fame and front facing camera, then you just need to put the new one on)
Step 6. Undo the 3 screws holding the home button retaining bracket then pick it up.
Step 7. Pry up the home button flex cable connector then remove the home button.
Step 8. Undo the 3 screws that holding the metal cover on the ear speaker.
Step 9. Take out the retaining bracket, ear speaker and front facing camera.
Step 10. Undo the 7 screws that locking the LCD metal plate.
Step 11. Pry up the LCD back plate connector.
Step 12. Replace your broken screen with the new one.
Note: We strongly recommend you to test the function of the new iPhone 6 plus digitizer and LCD screen assembly before you install it on. If you unfortunately get the defective part, you could ask your supplier to exchange for a new one.
No comments:
Post a Comment