Samsung Galaxy S3 GT-I9300 Assembly Tutorials

This is very detailed tutorials from etradesupply's blog, it is very useful for you to repair galaxy s3 cellphone.

This is an article for assembling the Samsung Galaxy S3 step by step after disassembly. If you cracked your Galaxy S3 screen or have to replace the microphone, the front or rear facing camera, SIM and SD card reader as well as other broken parts, you can follow these comprehensive tutorials. All the components are built in the back of the LCD display assembly. So our mainly task is to put all the parts back on the LCD assembly.

Tools: Small Philips Screwdriver   Tweezers

Step 1

Install the Ear Phone flex cable on the LCD assembly with front Housing as carefully as possible. The front glass and LCD display are adhered strongly together making it almost impossible to separate them. So we didn’t tear apart these parts when disassembling the Galaxy S3. It also means if you only cracked the glass lens, you may have to replace the entire screen.

Step 2

Assemble the vibrating motor on the LCD assembly, and make sure the two little pins line up on the case there and it stuck down with a proper push. Then install the Bluetooth antenna cable start by placing the circuit at the top, then make sure the two little holes that line up with pins on the case, gently push that down. Then bring the antenna cable down into the channel carefully.

Please visit http://www.etradesupply.com/blog/samsung-galaxy-s3-gt-i9300-assembly-tutorials/  see more steps