Cellphone Replacement Parts: How to reassemble Samsung Galaxy Note 4

http://www.etradesupply.com/blog/how-to-reassemble-samsung-galaxy-note-4/

Coupon code: ETS7H4XW for extra discounts on www.etradesupply.com for order over $50, and it won’t be expire until Feb. 10th, 2015.

At the first glance, you’ll easily find that the Samsung Galaxy Note 4 inherits the design and the great figuration of Galaxy Note series. After tearing down Samsung Galaxy Note 4, we found it’s very easy to repair. Compared with Samsung Galaxy Note Edge, it’s not only easier for you to use (The curve-display is not easy to hold) but also easier to be repaired. Here we show you how to reassemble Samsung Galaxy Note 4 step by step, just in 10 minutes.

Tools Needed:
Tweezers;
Ph00 Phillips Screwdriver

1.Put the ear speaker mesh cover in the middle plate.

2. Insert the home button flex ribbon in the middle plate.

3. Connect the charging port assembly to the middle plate.

4. Assemble the plastic bracket with front facing camera.

5. Connect the rear facing camera to the mother board.

6. Connect the front facing camera to the mother board.

7. Insert the 5 antenna chips in slots. (Notice: The 5 signal chips are different in shape, be careful not to place in the wrong position when reassembling.)

8. Insert the vibrating motor with power button flex in the slot.

7. Insert the vibrating motor with power button flex in the slot.

9. Put the ear speaker flex into the slot.

8. Put the earphone speaker flex into the slot.

10. Put the volume key flex into the slot.

9. Put the volume key flex into the slot.

11. Put the mother board in the slot and connect the charging port assembly to the mother board.

10. Put the mother board in the slot and connect the charging port assembly to the mother board.

12. Connect the ear speaker flex cable to mother board.

11. Connect the ear speaker flex cable to mother board.

13. Connect the home button flex cable to the mother board.

12. Connect the home button flex cable to the mother board.

14. Connect 2 antennas to mother board.

13. _1_Connect 2 antennas to mother board.

13. _2_Connect 2 antennas to mother board.

15. Fasten 1 screw in the charging port assembly.

14. Fasten 1 screw in the charging port assembly.

16. Fasten 1 screw in the mother board.

17. Adhere Samsung Galaxy Note 4 front housing adhesive to the middle plate. Intall the LCD screen and digitzer assembly, then connect the LCD screen flex cable and digitizer flex cable to the mother board.