How To Insert / Remove SIM Card From BlackBerry Z10

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

This article shows how to insert and remove SIM card from your BlackBerry Z10.

You have to be careful when removing the back cover as it is very flexible and may bend when you try to remove it.

Your BlackBerry Z10 uses a micro SIM card.

How To Insert / Remove SIM Card From BlackBerry Z10

How To Insert Micro SIM card In BlackBerry Z10

1. Remove the battery cover by pulling up the bottom of the back cover.

2. To remove the battery, from the end opposite to the battery contacts, lift and pull the battery out.

3. To insert the SIM card, slide the SIM Card into the SIM card slot with with the metal contacts facing down, please see the belowed middle plate A version and B Version showed.

4. Insert the battery by aligning the contacts.

5. Finally, put the back cover on by pushing it down until it clicks into place.

How To Remove Micro SIM Card From BlackBerry Z10

1. Remove the battery door by pulling up the bottom of the battery door.

2. To remove the battery, from the end opposite to the battery contacts, lift and pull the battery out.

3. To remove the SIM card, using gentle pressure, slide the SIM Card out.

Start by pushing the SIM card out from one end, then place your thumb on the top of the other end.

4. Finally, place the battery back in, and close the back cover.

Samsung Galaxy S III (S3) GT-I9300 LCD Screen and Digitizer Assembly with Front Housing

You can buy this  Samsung Galaxy S III (S3) GT-I9300 LCD Screen and Digitizer Assembly with Front Housing from:  http://www.etradesupply.com/samsung-galaxy-s-iii-s3-gt-i9300-lcd-screen-and-digitizer-assembly-with-front-housing.html

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

 

OEM Samsung Galaxy S III (S3) GT-I9300 LCD Screen and Digitizer Assembly with Front Housing

Specifications

Size: 4.8 inches

Material: Glass Reinforced Plastic

Resolution: 1280x720 pixels

Country of Origin: South Korea

Type of Flex Ribbon Connector: Clip

Product Features & ETS Advantages

Product Features:

The Samsung I9300 Screen Assembly with front housing, as the display of the 3rd generation in the family of Samsung Galaxy, has the same resolution and curve design with the Samsung Nexus SCH-I515 LCD Screen. It should be noted that on the flex ribbon there is a connecting port used to connect the navigator flex ribbon. When testing the LCD assembly, this port should not be neglected. The Samsung Galaxy S3 I9300 LCD Assembly also looks like the Galaxy s I9000 LCD Assembly from many aspects.

Please see the below difference between Galaxy S3 LCD and Digitizer Assembly with Front Housing and Galaxy S3 LCD and Digitizer Assembly
Choose the right one you need.

             

 Galaxy S3 LCD and Digitizer Assembly with Front Housing

 

    Galaxy S3 LCD and Digitizer Assembly without Front Housing

ETS Advantages:

ETrade Supply has established the ISO9001 certified QC procedure. For each Galaxy S III (S3) GT-I9300 LCD Screen and Digitizer Assembly with housing, we apply strict cosmetic inspection and functionality test process before packaging and transportation. We also invent our own super-protective packaging method to give the maximum protection to the Samsung I9300 LCD and Digitizer Assembly. Apart from this part, ETrade Supply also supply other Samsung I9300 replacement parts such as Samsung Galaxy S III I9300 Battery Door.

 

Apple iOS 6.1.3 Users Complain about Battery Drain Problems and Wi-Fi Issues

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

Just after Apple released the iOS 6.1.3 to fix a security problem that let someone access the iPhone by sneaking past the lock screen, new problems of the update also seem to have plagued some users, who are complaining that the battery inside their devices isn’t lasting as long as before.

Several Apple iPhone and iPad users posted on Apple Support Communities that the battery drains faster after installing the new update even when the device is not in use. It seems that users are losing battery power at a rate of 1% every 7 minutes. Furthermore, some users have posted that their battery went from full to dead in just 3 hours.

Another iOS 6.1.3 issue is the Wi-Fi connectivity. Several users in the Apple forum show their Wi-Fi connections are grayed out or inoperative. This particular issue has been around since iOS 6.0. Some say the problem was fixed with iOS 6.1.2 but came back with 6.1.3, while some say it was resolved with 6.1.3. Apple has acknowledged the problem and offers a support page with suggestions on resolving it. But if the issue cannot be resolved after these steps, you need to contact Apple and your wireless carrier.

Now that Apple is aware of these problems, we hope Apple will push out anther update to fix these problems.

iPhone Found to Be Most Vulnerable to Virus

The Latest news suggests that Apple’s iPhone is more “vulnerable” to attacks than Android, Windows Phone and BlackBerry devices. A study from SourceFire claims that most of mobile phone vulnerabilities have been discovered so far.


The company found 210 vulnerabilities in the iPhone, giving iOS an 81% share of known mobile phone vulnerabilities, while Android, Windows Phone and BlackBerry devices combined to have a 19% market share. A senior research engineer Yves Younan at SourceFire’s Vulnerabilities Research Team and author of the report, told ZDNet that the results were “surprising.” He also said that it was also “interesting” as additional security features has been implement in new versions of iOS.


He explained that while Android may have the highest all mobiles’ market share, iPhones are still one of the most popular smartphones in the world and cybercriminals are motivated to find loopholes in the operating system.
Younan noted that because Google’s platform is already open and vulnerable to third-party and malicious apps in its Google Play store, cybercriminals are less motivated to seek out software vulnerabilities.
new from www.etradesupply.com

HTC Butterfly LCD Screen and Digitizer Assembly with Light Guide

You can buy this  HTC Butterfly LCD Screen and Digitizer Assembly  from: http://www.etradesupply.com/oem-htc-butterfly-lcd-screen-and-digitizer-assembly-with-light-guide.html

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

Specifications
Size: 5.0 inches
Resolution: 1080x1920
Type of LCD Display: Super LCD 3
Type of Glass: Corning Gorilla Glass

Product Features & ETS Advantages

Product Features:
1. HTC Butterfly, the first 1080P cell phone made by HTC, is an international version of HTC Droid DNA released on Verizon in the US.
2. The LCD display of HTC Butterfly is ever thinnest, largest and best LCD HTC has used in its device, so any dead pixels, discoloration or white screen could be intolerable for users.
3. Tough the Digitizer and LCD screen of HTC Butterfly could be separated, it's more convenient and time-saving to replace your damage screen by using this HTC Butterfly LCD Screen and Digitizer assembly.

ETS Advantages:
1. Is ETrade Supply legit? Of course yes. ETrade Supply has been supplying wireless repair parts for customers around the world since 2006 and we have ISO9001 certification.
2. Does Etrade Supply sell 100% OEM parts? All products named OEM are rear OEM parts. We do sell non OEM parts, but we won't sell high copy parts in the name of OEM parts.
3. I can't find the parts I want anywhere, what should I do? Contact our customer service representatives, let them help you.
Apart from this part, ETrade Supply also provide other HTC Butterfly parts.

Product Features & ETS Advantages

1. It is highly recommended that before making any order, please double check the version of the parts you want. If you are uncertain about it, please contact our customer service representatives by Live Chat.
2. It is advisable to let professionals to replace your damaged phone. Fix a broken phone is not a easy job and ETrade Supply won't be responsible for the damage occurred during installation process.

Motorola Droid Razr M 4G LTE XT907 LCD Screen and Digitizer Assembly

Motorola Droid Razr M 4G LTE XT907 LCD Screen and Digitizer Assembly

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

OEM Motorola Droid Razr M 4G LTE XT907 LCD Screen and Digitizer Assembly

Specifications

Screen size: 4.3 inches

Resolution: 960 × 540 pixels

Display material: Super AMOLED

Technique principle: capacitive

Type of connector: clip

Product Features & ETS Advantages

Product Features:

Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly is composed of LCD Display and Digitizer Touch Panel. Compared with Motorola Photon Q 4G LTE XT897, these two models have the same resolution and same size LCD Display. The difference is that Motorola Droid Razr M 4G LTE XT907 display adopted the Super AMOLED material with the protection of Corning Gorilla Glass, while the Motorola Droid Razr M 4G LTE XT907 display adopted TFT material with the protection of scratch-resistant glass. Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly is a great important component of Motorola Droid Razr M 4G LTE XT907. After constant use, the Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly will suffer from wear and tear quickly. This Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly is a good replacement part for your scratched, cracked or damaged LCD Screen and Digitizer.

ETS Advantages:

ETrade Supply provides OEM Brand New Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly with high quality and reasonable price. As the first enterprise of the electronics parts service industry to get the ISO9001 certificated QC of quality system, ETrade Supply conducts strict visual inspection and functionality test before package and transportation. Besides, we also invent our own super-protective packaging method to give the maximum protection to the Motorola Droid Razr M 4G LTE XT907 LCD Screen & Digitizer Assembly. Therefore, please rest assured that our product quality is guaranteed. ETS also supplies other replacement parts of Motorola Droid Razr M 4G LTE XT907, such as Front Housing, Battery Door, etc.

Apple iPad Mini LCD Screen

You can buy this  OEM Apple iPad Mini LCD Screen from:  http://www.etradesupply.com/oem-apple-ipad-mini-lcd-screen.html 

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

OEM Apple iPad Mini LCD Screen

Specifications

Size: 7.9"

Resolution: 1024*768

Origin: China

Ratio: 4:3

Product Features & ETS Advantage

Product Features:

(Front Side of iPad Mini LCD Screen)

(Rear Side of iPad Mini LCD Screen)

(Codes on the Back of iPad Mini LCD Screen)

(Flex Cable Ribbon of iPad Mini LCD Screen)

The iPad Mini LCD Screen has the same resolution as the 2nd generation of iPad screen, so the iPad Mini LCD can also display a sharp picture. The iPad Mini screen features a clip type of connecting port. The screen flex ribbon is separate component used to connect the screen to the motherboard. If the iPad Mini screen is shipped together with the flex ribbon attached, it is advisable to adhere the ribbon on the back of the screen in order to avoid damaging it.

ETS Advantage:
ETrade Supply has established the ISO9001 certified QC procedure. For each iPad Mini LCD Screen, we apply strict cosmetic inspection and functionality test process before packaging and transportation. We also invent our own super-protective packaging method to give the maximum protection to the iPad Mini LCD Screen. Apart from this part, ETrade Supply also supply other iPad Mini replacement parts such as iPad Mini Rear Housing. 

Purchasing & Installation Notes

The iPad Mini LCD Screen is a fragile electronic component and can be easily damaged if improperly handled during the process of repair or replacement. ETrade Supply cannot be responsible for any possible damage caused by incorrect installation. When putting a lot of iPad Mini LCD Screen together, please try not to pile them up because too much pressure may cause damage to the digitizer. Also, please try to handle the repair or replacement work in dry environment without direct sunlight (the temperature should be kept between -20 ℃- to +70 ℃).  Also, please keep the iPad Mini LCD Screen away from acid, alkali or other corrosive materials.

iPad mini disassembly video

Apple’s Plan in India indicates the existence of Cheaper iPhone

Apple looks like it’s making a more aggressive push into emerging markets as The Economic Times reports that the company will triple the number of exclusive stores in India by 2015. Exclusive Apple stores are different from the iconic company-owned Apple stores that we typically see in the United States in that they’re third-party franchises that only sell Apple products. All the same, The Economic Times says that Apple wants to have 200 exclusive franchises up and running in India over the next two years and is also planning ”to expand its presence in multi-brand stores” as well. The move to bolster its retail presence in India comes amid speculation that Apple will release a budget version of its iPhone sometime this year to appeal to consumers in emerging markets such as China and India.

Apple iPhone 5 LCD Screen and Digitizer Assembly with Frame

You can buy this i9300 lcd assembly from: http://www.etradesupply.com/oem-apple-iphone-5-lcd-screen-and-digitizer-assembly-with-frame.html

Discount Notice: If the total amount of your order is above $5, you can use the coupon code ETSDB04 (unlimited times) to get extra discounts on www.etradesupply.com

OEM Apple iPhone 5 LCD Screen and Digitizer Assembly with Frame

Specifications

Size: 4.0 inches

Material: LED-backlit IPS TFT

Resolution: 1136x640 pixels

Color of screen: 16M

Technique Principle: capacitive, touch screen

Type of connector: clip

Product Features & ETS Advantages

Product Features:

The iPhone 5 is upgraded with 4-inch display which can offer 44% better color saturation compared to the old Retina display. Apple’s new iPhone 5 works on 4G LTE networks all over the world. iPhone 5 battery lasts longer than the battery in the iPhone 4S. iPhone 5 adopts A6 processor, which offers twice the performance of the A5 chip, and iOS 6, which brings tons of new features to Apple’s mobile platform.

This iPhone 5 LCD Screen and Digitizer Assembly with Frame is composed of LCD Screen, Digitizer Touch Panel and Frame. Compared with iPhone 4S, iPhone 5 screen has a larger display that adopts the material of Corning Gorilla Glass. The iPhone 5 LCD and Digitizer Touch Panel Assembly is one of the most important component parts of the iPhone 5, and also the best replacement part of your scratched, cracked and damaged screen.

ETS Advantages:

iPhone 5 LCD Screen and Digitizer Assembly is available with insufficient supply of source in the current market. However, ETrade Supply provides sufficient OEM Brand New iPhone 5 LCD Screen and Digitizer Assembly with Frame. ETrade Supply has established the ISO9001 certificated QC procedure. We conduct strict cosmetic inspection and functionality test for each iPhone 5 LCD Screen and Digitizer Assembly before package and transportation. Besides, we also invent our own super-protective packaging method to give the maximum protection to all replacement parts for iPhone 5. ETrade Supply also supplies other cell phone parts, such as iPhone 5 LCD Backlight, Rear Housing, Glass Lens, etc.

Apple iPhone 5 LCD Screen and Digitizer Assembly upper part

 

Apple iPhone 5 LCD Screen and Digitizer Assembly bottom part

Purchasing & Installation Notes

Please handle the flex cable ribbon on the back of iPhone 5 LCD Screen and Digitizer Assembly carefully during installing iPhone 5 LCD Screen and Digitizer Assembly. Besides, great attention should be paid to buckle the LCD Screen and Digitizer Assembly onto the motherboard since the flex cable ribbon is fragile, which will break off and influence the performance of LCD Screen and Digitizer Touch Panel because of mishandling. Please be kindly noted that ETrade Supply cannot be responsible for any possible damage caused by personal factors. In addition, any corrosive material should be kept away from this iPhone 5 LCD Screen and Digitizer Assembly with Frame, and please keep them in a dark and dry environment and do not pile them up.